+86-17688612661 
Hot Products
High-Performance Fluorine Rubber Heat Shrink Tubing Factory and Suppliers in China – Excellent Oil Resistance
⭐ Product Features
-
🌡 High-Temperature Resistance
• Operating temperature range: -55°C to 200°C (short-term exposure up to 220°C).
• Shrinkage temperature: starts at 150°C, fully shrinks at 175°C. -
🛢 Chemical & Oil Resistance
• Resistant to fuel, lubricating oil, hydraulic fluid, and organic solvents; ideal for engine compartments, fuel tanks, and hydraulic systems.
-
⚡ Mechanical & Electrical Properties
• Shrink ratio: 2:1 (radial shrinkage 50%, axial shrinkage <20%).
• Tensile strength: 10.5 N/mm², elongation 300%, ensuring flexibility and tear resistance.
• Insulation: Volume resistivity >10¹⁴ Ω·cm, dielectric strength ≥26 kV/mm, meeting electrical safety standards. -
✅ Environmental & Safety Compliance
• Compliant with ROHS, REACH, and Sony SS-00259 environmental directives; free from halogens, PBDEs, and other hazardous substances.
• Flame retardancy: UL94 V-0 rated, self-extinguishing within 15 seconds, suitable for high-safety environments.
📋 Technical Specifications
Parameter |
Value |
Material |
Fluorine rubber |
Color |
Black |
Density |
1.9 g/cm³ |
Water Absorption |
0.2% |
Certification Standards |
UL, IS9001, IATF16949 |
🔧 Usage Instructions
-
📌 Installation
• Slide tubing over the component to be protected, ensuring full coverage.
• Apply heat (e.g., heat gun or oven) at 175°C until fully shrunk and conformal.
• After cooling, verify sealing and insulation integrity. -
⚠ Cautions
• Avoid excessive heating to prevent material degradation.
• Store in dry conditions; avoid prolonged UV exposure.
📊 Characteristics
Product Performance |
Testing Condition |
Unit |
Performance Standard |
||
Physical Performance |
Longitudinal Shrinkage Ratio |
250℃±3℃/10minutes |
% |
-15～+5 |
|
Limited Shrinkage |
200℃/3minutes |
— |
No cracks on the surface |
||
Water Absorption |
23℃/24hours |
% |
≤0.2 |
||
Density |
— |
g/cm³ |
≤1.90 |
||
Tensile Strength |
500mm/minute |
Mpa |
≥13.0 |
||
2% Tensile Secant Modulus |
— |
Mpa |
80～160 |
||
Breakage Elongation |
500mm/minute |
% |
≥350 |
||
Heat Shock |
300℃/4hours |
— |
The surface shows no cracks, no flow, and no dripping. |
||
Low Temperature Flexibility |
-55℃/4hours |
— |
No cracks on the surface |
||
Resistance Color fastness to light |
— |
— |
Color Tolerance ≤ Color Tolerance of Standard Sample |
||
After Thermal Aging |
Breakage Elongation |
200℃±5℃/168hours |
% |
≥200 |
|
Tensile Strength |
Mpa |
≥10.0 |
|||
Electrical Performance |
Dielectric Strength |
— |
KV/mm |
≥10 |
|
Insulation Pressure Resistance |
3000V/60seconds |
— |
No Shock |
||
Volume Resistivity |
Room Temperature |
— |
Ω.m |
≥1.0×10¹² |
|
After Humid |
— |
Ω.m |
≥1.0×10¹¹ |
||
Chemical Performance |
Resistance to Liquid |
Tensile Strength |
500mm/minute |
Mpa |
≥10.0 |
Breakage Elongation |
500mm/minute |
% |
≥350 |
||
Quality Change |
— |
% |
≤10 |
||
Flame Retardancy |
Self-extinguish within 60seconds after faraway the hot |
S |
Pass |
||
Copper Corrosion |
175℃/16hours |
— |
No dents or discoloration on the surface |
||
Salt Atmosphere |
48hours |
% |
No corrosion, damage or bulging on the surface |
||
📦 Packaging & Advantages
Packaging & Storage
• Packaging: Coiled or straight-cut, 50 meters per roll, sealed in moisture-proof bags.
• Storage conditions: -20°C to 30°C, relative humidity <70%.
• Storage conditions: -20°C to 30°C, relative humidity <70%.
Key Advantages Summary
• Extreme environment adaptability: Maintains performance from -55°C to 200°C.
• Comprehensive protection: Resistant to oil, chemicals, flame, and mechanical wear.
• Environmental compliance: Meets international standards, supporting sustainability.
• Comprehensive protection: Resistant to oil, chemicals, flame, and mechanical wear.
• Environmental compliance: Meets international standards, supporting sustainability.
📐 Product Specification Sheet
Specification |
Before Contraction Size |
After Contraction Size |
||
mm |
Inner Diameter |
Wall Thickness |
Max. Inner Diameter |
Wall Thickness |
Ф1.6 |
2.0±0.40 |
0.25±0.05 |
0.8 |
0.50±0.10 |
Ф2.4 |
2.0±0.40 |
0.25±0.05 |
1.2 |
0.50±0.10 |
Ф3.2 |
3.8±0.60 |
0.35±0.05 |
1.6 |
0.76±0.15 |
Ф4.8 |
6.0±0.50 |
0.40±0.05 |
2.4 |
0.89±0.18 |
Ф6.4 |
7.4±0.50 |
0.40±0.05 |
3.2 |
0.89±0.18 |
Ф7.9 |
8.4±0.50 |
0.40±0.05 |
3.9 |
0.89±0.18 |
Ф9.5 |
10.6±0.80 |
0.40±0.06 |
4.8 |
0.89±0.20 |
Ф12.7 |
13.5±0.80 |
0.40±0.06 |
6.4 |
0.89±0.20 |
Ф15.9 |
17.0±1.00 |
0.45±0.06 |
8.0 |
1.02±0.20 |
Ф19.1 |
20.5±1.50 |
0.50±0.08 |
9.5 |
1.07±0.20 |
Ф22.2 |
23.7±1.50 |
0.50±0.08 |
11.1 |
1.12±0.30 |
Ф25.4 |
27.0±1.50 |
0.60±0.08 |
12.7 |
1.25±0.30 |
Ф31.8 |
33.5±1.50 |
0.60±0.08 |
15.9 |
1.30±0.30 |
Ф38.1 |
40.5±2.00 |
0.65±0.10 |
19.1 |
1.40±0.40 |
Ф50.8 |
53.0±2.00 |
0.70±0.10 |
25.4 |
1.65±0.43 |
❓ Frequently Asked Questions
Q
What temperature range can this fluorine rubber heat shrink tubing withstand?
This tubing operates reliably from -55°C to 200°C, with short-term exposure tolerance up to 220°C. The shrinkage process begins at 150°C and completes at 175°C, making it suitable for high-heat industrial and automotive environments.
Q
What is the shrink ratio of this heat shrink tubing?
The product features a 2:1 shrink ratio, meaning it shrinks radially by 50% while the axial shrinkage remains under 20%. This ensures a snug, conformal fit over a wide variety of component shapes and sizes.
Q
Is this tubing compliant with environmental and safety regulations?
Yes. The tubing fully complies with ROHS, REACH, and Sony SS-00259 environmental directives. It is free from halogens, PBDEs, and other hazardous substances. It is also UL94 V-0 flame retardant rated, self-extinguishing within 15 seconds.
Q
What chemicals and fluids is this tubing resistant to?
Made from fluorine rubber, this tubing resists fuel, lubricating oil, hydraulic fluid, and a wide range of organic solvents. It is specifically designed for demanding applications such as engine compartments, fuel tanks, and hydraulic systems.
Q
How should this heat shrink tubing be installed?
Slide the tubing over the component ensuring full coverage, then apply heat using a heat gun or oven at 175°C until the tubing is fully shrunk and conforms to the component. After cooling, verify that sealing and insulation integrity are maintained.
Q
What are the packaging and storage requirements for this product?
The tubing is available coiled or straight-cut, packaged in 50-meter rolls sealed in moisture-proof bags. For optimal storage, keep at temperatures between -20°C and 30°C with relative humidity below 70%, and avoid prolonged UV exposure.