+86-17688612661 
Hot Products
High-End PTFE Heat Shrink Tubing from China Suppliers & Factory - Chemical Resistant & High-Temperature Performance
★ Product Features
-
ⓘ Broad Temperature Range
Continuous use from -80°C to 260°C; short-term exposure to higher temperatures possible. Shrinkage requires >300°C for tight encapsulation.
-
ⓘ Chemical Stability
Resistant to strong acids, alkalis, organic solvents, and oils; only elemental fluorine and molten alkali metals may affect it at high temperatures.
-
ⓘ Electrical Insulation
Stable dielectric constant (2.1), surface resistance >10¹³Ω, volume resistance >10¹⁸Ω·m, ensuring reliable high-frequency signal transmission.
-
ⓘ Low Friction & Non-Stick
Dynamic friction coefficient 0.2–0.3, hydrophobic surface (contact angle 114°), preventing media adhesion.
-
ⓘ Flame Retardancy & Safety
Meets UL94 V-0 standard, oxygen index >95%, non-combustible in air.
-
ⓘ Mechanical Performance
Shrink ratio 1.7:1 or 4:1 (model-dependent), tightly conforms to substrates after shrinkage, providing stress relief and sealing.
-
ⓘ Environmental Durability
ROHS compliant; lifespan 5–8 years in normal conditions, maintains integrity in harsh environments.
★ Application
Product Application
◎ Electronics: Insulation for high-frequency circuits, solder joint protection, cable labeling.
◎ Industrial: Chemical pipeline anti-corrosion, anti-wear for mechanical transmission parts.
Product Application
◎ Medical: Biocompatible certified products for sterile equipment.
◎ Aerospace: High-temperature protection for aviation wiring.
★ Characteristics
| Project | Test Procedure | Parameter |
|---|---|---|
| Proportion (g/cm³) | ASTM D792 | 2.16 |
| Tensile Strength (MPa) | ASTM D638 | 24.5 |
| Ultimate Elongation (%) | ASTM D638 | 350 |
| Bending Coefficient (MPa) | ASTM D790 | 490 |
| Impact Strength | ASTM D256 +23°C -54°C J/m | 107 |
| Hardness (A) | ASTM D2240 | 75 |
| Friction Coefficient | -- | 0.1 |
| Melting Degree (°C) | -- | 327 |
| Actual Operating Temperature Range (°C) | -- | 260 |
| Fire Retardant Grade | UL-224 | VW-1 |
| Dielectric Constant (10³–10⁶ Hz) | ASTM D150 | 2.1 |
| Dissipation Factor (10⁶ Hz) | ASTM D150 | 0.0002 |
| Arc Coefficient (S) | ASTM D495 | >300 |
| Volume Resistivity (Ω·cm) | ASTM D257 | >10¹⁸ |
| Weather Resistant | (2000h) | No Crack |
| Solvent Resistant | ASTM D543 | Excellent |
| Chemical Resistant | ASTM D543 | Excellent |
| Breakdown Strength | ASTM D543 | 25 KV/MM |
★ Product Specification Sheet
Specification Sheet 01
Specification Sheet 02
Shrinkage Ratio 1.7:1
| Specification | Inner Diameter (mm) | Wall Thickness (mm) — Ordinary Type | Wall Thickness (mm) — Thicker Type | Packing | Tube Type | |||
|---|---|---|---|---|---|---|---|---|
| Before Contraction | After Contraction | Before Contraction | After Contraction | Before Contraction | After Contraction | |||
| Ф0.5 | 0.7±0.2 | ≤0.35 | 0.10±0.05 | 0.15±0.05 | 0.12±0.05 | 0.18±0.05 | 200M | Round Tube |
| Ф0.6 | 0.8±0.2 | ≤0.35 | 0.10±0.05 | 0.15±0.05 | 0.12±0.05 | 0.18±0.05 | 200M | Round Tube |
| Ф0.8 | 1.0±0.2 | ≤0.47 | 0.10±0.05 | 0.15±0.05 | 0.12±0.05 | 0.18±0.05 | 200M | Round Tube |
| Ф1.0 | 1.2±0.2 | ≤0.6 | 0.10±0.05 | 0.15±0.05 | 0.12±0.05 | 0.18±0.05 | 200M | Round Tube |
| Ф1.5 | 1.7±0.2 | ≤0.9 | 0.10±0.05 | 0.15±0.05 | 0.19±0.05 | 0.3±0.05 | 200M | Round Tube |
| Ф2.0 | 2.2±0.2 | ≤1.25 | 0.10±0.05 | 0.15±0.05 | 0.19±0.05 | 0.3±0.05 | 200M | Round Tube |
| Ф2.5 | 2.7±0.2 | ≤1.55 | 0.10±0.05 | 0.15±0.05 | 0.19±0.05 | 0.3±0.05 | 200M | Round Tube |
| Ф3.0 | 3.2±0.2 | ≤1.75 | 0.15±0.05 | 0.2±0.05 | 0.19±0.05 | 0.3±0.05 | 200M | Round Tube |
| Ф3.5 | 3.7±0.2 | ≤2.06 | 0.15±0.05 | 0.2±0.05 | 0.19±0.05 | 0.3±0.05 | 200M | Round Tube |
| Ф4.0 | 4.3±0.3 | ≤2.5 | 0.15±0.05 | 0.2±0.05 | 0.19±0.05 | 0.3±0.05 | 200M | Round Tube |
| Ф4.5 | 4.8±0.3 | ≤2.75 | 0.15±0.05 | 0.2±0.05 | 0.19±0.05 | 0.3±0.05 | 200M | Round Tube |
| Ф5.0 | 5.3±0.3 | ≤3.05 | 0.15±0.05 | 0.2±0.05 | 0.19±0.05 | 0.3±0.05 | 200M | Round Tube |
| Ф5.5 | 5.8±0.3 | ≤3.23 | 0.15±0.05 | 0.2±0.05 | 0.22±0.05 | 0.36±0.05 | 100M | Round Tube |
| Ф6.0 | 6.3±0.3 | ≤3.70 | 0.15±0.05 | 0.2±0.05 | 0.22±0.05 | 0.36±0.05 | 100M | Round Tube |
| Ф6.5 | 6.8±0.3 | ≤3.82 | 0.15±0.05 | 0.2±0.05 | 0.22±0.05 | 0.36±0.05 | 100M | Round Tube |
| Ф7.0 | 7.3±0.3 | ≤4.1 | 0.15±0.05 | 0.2±0.05 | 0.22±0.05 | 0.36±0.05 | 100M | Flat Tube |
| Ф7.5 | 7.8±0.3 | ≤4.4 | 0.15±0.05 | 0.23±0.05 | 0.22±0.05 | 0.36±0.05 | 100M | Flat Tube |
| Ф8.0 | 8.3±0.3 | ≤4.8 | 0.15±0.05 | 0.23±0.05 | 0.22±0.05 | 0.36±0.05 | 100M | Flat Tube |
| Ф9.0 | 9.3±0.3 | ≤5.3 | 0.15±0.05 | 0.23±0.05 | 0.22±0.05 | 0.36±0.05 | 100M | Flat Tube |
| Ф10.0 | 10.5±0.5 | ≤5.88 | 0.15±0.05 | 0.23±0.05 | 0.22±0.05 | 0.36±0.05 | 100M | Flat Tube |
| Ф11.0 | 11.5±0.5 | ≤6.8 | 0.15±0.05 | 0.23±0.05 | 0.22±0.05 | 0.36±0.05 | 100M | Flat Tube |
| Ф12.0 | 12.5±0.5 | ≤7.2 | 0.15±0.05 | 0.23±0.05 | 0.22±0.05 | 0.36±0.05 | 100M | Flat Tube |
| Ф14.0 | 14.5±0.5 | ≤8.3 | 0.15±0.05 | 0.27±0.05 | 0.22±0.05 | 0.36±0.05 | 100M | Flat Tube |
| Ф15.0 | 15.5±0.5 | ≤8.9 | 0.15±0.05 | 0.27±0.05 | 0.22±0.05 | 0.36±0.05 | 100M | Flat Tube |
| Ф16.0 | 17.0±1.0 | ≤9.5 | 0.15±0.05 | 0.27±0.05 | 0.22±0.05 | 0.36±0.05 | 100M | Flat Tube |
| Ф17.0 | 18.0±1.0 | ≤10.0 | 0.25±0.1 | 0.35±0.1 | - | - | 100M | Flat Tube |
| Ф18.0 | 19.0±1.0 | ≤10.5 | 0.25±0.1 | 0.35±0.1 | - | - | 100M | Flat Tube |
| Ф19.0 | 20.0±1.0 | ≤11.2 | 0.25±0.1 | 0.4±0.1 | - | - | 100M | Flat Tube |
| Ф20.0 | 21.0±1.0 | ≤11.8 | 0.25±0.1 | 0.4±0.1 | - | - | 100M | Flat Tube |
| Ф25.0 | 26.0±1.0 | ≤14.7 | 0.25±0.1 | 0.4±0.1 | - | - | 50M | Flat Tube |
| Ф30.0 | 31.0±1.0 | ≤17.6 | 0.35±0.2 | 0.6±0.2 | - | - | 50M | Flat Tube |
| Ф35.0 | 37.0±2.0 | ≤20.5 | 0.55±0.2 | 1.0±0.2 | - | - | 50M | Flat Tube |
| Ф40.0 | 42.0±2.0 | ≤23.5 | 0.55±0.2 | 1.0±0.2 | - | - | 50M | Flat Tube |
Shrinkage Ratio 4:1
| Specification | Inner Diameter (mm) | Wall Thickness (mm) | Packing | Tube Type | ||
|---|---|---|---|---|---|---|
| Before Contraction | After Contraction | Before Contraction | After Contraction | |||
| 1.5 | 1.8±0.4 | ≤0.38 | 0.08±0.05 | 0.25±0.05 | 200M/Tray | Round Tube |
| 2.0 | 2.4±0.4 | ≤0.50 | 0.08±0.05 | 0.25±0.05 | 200M/Tray | Round Tube |
| 2.5 | 2.9±0.4 | ≤0.63 | 0.08±0.05 | 0.25±0.05 | 200M/Tray | Round Tube |
| 3.0 | 3.4±0.4 | ≤0.75 | 0.08±0.05 | 0.25±0.05 | 200M/Tray | Round Tube |
| 3.5 | 3.9±0.4 | ≤0.88 | 0.08±0.05 | 0.25±0.05 | 200M/Tray | Round Tube |
| 4.0 | 4.4±0.4 | ≤1.0 | 0.08±0.05 | 0.25±0.05 | 200M/Tray | Round Tube |
| 4.5 | 4.8±0.4 | ≤1.10 | 0.08±0.05 | 0.30±0.05 | 200M/Tray | Round Tube |
| 4.8 | 5.3±0.4 | ≤1.20 | 0.08±0.05 | 0.30±0.05 | 200M/Tray | Round Tube |
| 5.0 | 5.5±0.5 | ≤1.25 | 0.08±0.05 | 0.30±0.05 | 100M/Tray | Round Tube |
| 6.0 | 6.5±0.5 | ≤1.50 | 0.10±0.05 | 0.30±0.05 | 100M/Tray | Round Tube |
| 6.5 | 7.0±0.5 | ≤1.63 | 0.10±0.05 | 0.30±0.05 | 100M/Tray | Flat Tube |
| 7.0 | 7.5±0.5 | ≤1.75 | 0.10±0.05 | 0.30±0.05 | 100M/Tray | Flat Tube |
| 8.0 | 8.5±0.5 | ≤2.0 | 0.10±0.05 | 0.30±0.05 | 100M/Tray | Flat Tube |
| 9.0 | 9.5±0.5 | ≤2.3 | 0.10±0.05 | 0.30±0.05 | 100M/Tray | Flat Tube |
| 9.5 | 10.0±0.5 | ≤2.4 | 0.10±0.05 | 0.30±0.05 | 100M/Tray | Flat Tube |
| 10.0 | 10.3±0.5 | ≤2.5 | 0.10±0.05 | 0.30±0.05 | 100M/Tray | Flat Tube |
| 11.0 | 12.0±1 | ≤2.75 | 0.10±0.05 | 0.30±0.05 | 100M/Tray | Flat Tube |
| 12.0 | 13.0±1 | ≤3.0 | 0.10±0.05 | 0.30±0.05 | 100M/Tray | Flat Tube |
| 14.0 | 14.0±1 | ≤3.5 | 0.10±0.05 | 0.35±0.05 | 100M/Tray | Flat Tube |
| 16.0 | 15.0±1 | ≤4.0 | 0.10±0.05 | 0.35±0.05 | 100M/Tray | Flat Tube |
Make a Free Consultation
★ Frequently Asked Questions
What is the operating temperature range of this PTFE heat shrink tubing?
This PTFE heat shrink tubing supports continuous use from -80°C to 260°C. Short-term exposure to higher temperatures is also possible. Shrinkage is initiated at temperatures above 300°C for tight encapsulation.
What shrink ratios are available?
Two shrink ratios are available: 1.7:1 and 4:1. The 1.7:1 ratio is suitable for standard applications, while the 4:1 ratio provides greater contraction for covering irregular shapes or larger diameter variations.
Is PTFE heat shrink tubing suitable for medical and aerospace applications?
Yes. The tubing supports biocompatible certified products used in sterile medical equipment. For aerospace, it provides reliable high-temperature protection for aviation wiring, meeting the stringent requirements of both industries.
What chemicals is PTFE heat shrink tubing resistant to?
The tubing is resistant to strong acids, alkalis, organic solvents, and oils. Only elemental fluorine and molten alkali metals may affect it under high-temperature conditions.
Does the product comply with environmental and safety standards?
Yes. The product is ROHS compliant, meets the UL94 V-0 flame retardancy standard with an oxygen index of over 95%, and is non-combustible in air. It also carries a fire retardant grade of VW-1 per UL-224.
What is the expected lifespan of PTFE heat shrink tubing?
Under normal operating conditions, the tubing has an expected lifespan of 5–8 years. It maintains its structural integrity and performance even in harsh environments, making it ideal for long-term industrial and electronic applications.