Leave Your Message
China Suppliers Factory Double Wall Heat Shrink Tubing - Multi-Color, High Temperature Resistant, Waterproof Insulation
Hot Products

China Suppliers Factory Double Wall Heat Shrink Tubing - Multi-Color, High Temperature Resistant, Waterproof Insulation

,

Product Overview

,

Introducing our premium double wall heat shrink tubing, also known as adhesive-lined heat shrink tubing, designed for industrial-grade applications. Manufactured by leading suppliers in China, this innovative protective sleeve features a dual-layer co-extrusion process, combining radiation-crosslinked polyolefin with a hot melt adhesive. The exceptional dual-layer structure includes an outer layer that delivers outstanding insulation, flame retardancy, and mechanical protection, while the inner adhesive layer melts and flows when heated, creating a high-strength, reliable seal. This product excels in providing insulation, sealing, waterproofing, corrosion resistance, and leak prevention, making it ideal for the permanent protection and encapsulation of wiring harnesses, cable splices, metal pipes, and electronic components. Trust in a product made in our state-of-the-art factory for your everyday protection needs.

,

    Product Features

    • Superior Sealing & Waterproof Performance

      The inner hot melt adhesive has a low melting point and strong adhesion. During heating and shrinkage, it melts to fully fill irregular gaps on the surface of the wrapped object, bonding firmly to various materials like plastic, rubber, and metal, achieving reliable waterproof, moisture-proof, and airtight sealing.

    • Excellent Insulation & Mechanical Protection

      The outer radiation-crosslinked polyolefin material offers high insulation resistance, good flame retardancy (except for clear types), and high mechanical strength. The medium-wall design maintains a degree of flexibility while effectively enhancing overall protection against abrasion, cutting, and mechanical stress buffering.

    • Broad Temperature Range & Stable Shrinkage

      The product maintains stable performance within a continuous operating temperature range of -45℃ to 125℃ (clear type: -45℃ to 105℃). The initial shrinkage temperature starts around 70℃ or above, with full shrinkage typically achieved at 125℃, ensuring a quick and even shrinking process.

    • Strong Environmental Adaptability

      The structure adapts well to irregularly shaped objects. The crosslinked polymer material exhibits excellent resistance to chemical solvents, acids/alkalis, and aging, suitable for various complex environments.

    • Flexible Specifications & Environmental Safety

      Available in multiple shrink ratios such as 2:1, 3:1, 4:1, etc., to fit cables and connectors of different sizes. The product complies with ROHS environmental standards, ensuring no release of hazardous substances.

    Product Characteristics Parameter

    3:1 Environmental Double Wall Heat Shrink Tube
    Product Performance Test Method Performance Index
    Tensile Strength (MPa) ASTM D2671 ≥12
    Breakage Elongation (%) ASTM D2671 ≥300
    Tensile Strength after Heat aging (MPa) UL224 158℃ × 168h ≥7.3
    Breakage Elongation after heat aging (%) UL224 158℃ × 168h ≥200
    Breakdown Strength (KV/mm) UL224 2500V maintain 60S No breakdown
    Volume Resistivity (Ω.m) IEC 93 ≥1×1014
    Operating Temperature Range -45℃ ~ 125℃
    Rated Voltage 600V
    Shrinkage Temperature Beginning Shrinkage Temperature 70℃, Lowest fully contracted Temperature 125℃, Shrinkage Operating Temperature 125℃ ~ 200℃
    Shrinkage Ratio/Axial Shrinkage Ratio Shrinkage Ratio 3:1 / Axial Shrinkage Ratio ≤±8%
    Environmental Performance Compliant with the EU ROHS standards
    Standard Color Black (Other Colors are available as per customization)
    Printing Content: E203950 us WOER SBRS TUBE (Φxx)
    Material: (1) EVA; (2) Hot Melt Adhesive

    Hot Melt Adhesive Performance Parameter

    Hot Melt Adhesive Performance
    Performance Test Method Performance Index
    Water Absorption ASTM-D570 <0.2%
    Softening Point ASTM-E8 95℃
    Peel Strength (PE) ASTM-D1000 120N/25mm
    Peel Strength (AL) ASTM-D1000 80N/25mm

    Product Specifications & Parameters

    Structure & Material

    Dual-layer structure. Outer layer: Radiation-crosslinked polyolefin; Inner layer: Hot melt adhesive.

    Standard Color

    Black is standard. Clear or other special colors can be customized per customer request.

    Shrink Ratio

    Available in various specifications like 2:1, 3:1, 4:1.

    Temperature Characteristics

    Continuous Operating Temp: -45℃ ~ +125℃ (standard); -45℃ ~ +105℃ (clear). Initial Shrinkage Temp: ≥ 70℃. Full Shrinkage Temp: ≥ 125℃.

    Physical & Electrical Properties

    Excellent electrical insulation, flame retardancy (non-clear types), flexibility, and weather resistance.

    Environmental Certification

    ROHS compliant.

    Primary Application Fields

    • Automotive & Marine Manufacturing

      Waterproofing, insulation, and vibration damping for engine wiring harnesses, sensor cables, and automotive electronic connectors.

    • Power & Energy Engineering

      Waterproof sealing and corrosion-resistant insulation for medium/low voltage power cable joints and terminations, connection protection for outdoor electrical equipment.

    • Electronics, Appliances & Communications

      Solder joint protection on PCB, wire harness bundling and identification, insulation encapsulation for components like resistors/capacitors, and cable splice protection in communication base stations.

    • Industrial Equipment & Piping

      Anti-corrosion wrapping for metal pipes and valves, sealing and mechanical buffering for pneumatic/hydraulic lines, abrasion protection for equipment cables.

    • Consumer Products

      Strain relief and insulation sealing at cable exits for internal wiring of household appliances and power adapters.

    Installation & Usage Guide

    Preparation

    Ensure the surface of the cable or object to be wrapped is clean, dry, free of oil, and sharp burrs. Select the appropriate double-wall heat shrink tubing size based on the object's maximum diameter (the recovered inner diameter should be slightly smaller than the object's diameter).

    Installation Steps

    • Slide the double-wall heat shrink tubing over the desired location.
    • Using a heat gun, oven, or other heating tool, apply heat evenly from the middle or one end, moving along the axis and circumference.
    • Observe the tubing shrinking uniformly until it tightly conforms to the object. The inner adhesive should melt and slightly extrude from both ends, forming smooth sealing beads.
    • Allow the tubing to cool and solidify naturally after heating.

    Precautions

    • Keep the heat gun moving continuously during heating to avoid localized overheating that could char the outer layer or carbonize the inner adhesive.
    • Ensure the heating temperature reaches the full shrinkage requirement to allow the inner adhesive to melt completely for optimal sealing.
    • Store the product in a cool, dry place away from direct sunlight and high temperatures.

    Environmental Standard Parameter

    Compliant with the EU ROHS Standards
    Environmental Material Content (PPM) Test Method
    Cadmium (Cd) ≤100 IEC 62321/2ND CDV(111/95/CDV),ICP-OES
    Plumbum (Pb) ≤100 IEC 62321/2ND CDV(111/95/CDV),ICP-OES
    Mercury (Hg) ≤1000 IEC 62321/2ND CDV(111/95/CDV),ICP-OES
    Chromium (Cr) ≤1000 IEC 62321/2ND CDV(111/95/CDV),UV-Vis
    PBB ≤1000 IEC 62321
    PBDE ≤1000 IEC 62321

    Product Specification Sheet

    Specifications Before Contraction Size (mm) After Contraction Size (mm) Package Standard
    Inch mm Min. Inner Diameter (D) Max. Inner Diameter (d) Total Wall Thickness T+t Adhesive Layer Wall Thickness (t) M/Tray M/PC
    1/8 φ3.2 ≥3.2 ≤1.00 0.90±0.30 0.40±0.20 200 —
    3/16 φ4.8 ≥4.8 ≤1.60 1.05±0.30 0.40±0.20 100 —
    1/4 φ6.4 ≥6.4 ≤2.20 1.25±0.30 0.45±0.20 100 —
    5/16 φ7.9 ≥7.9 ≤2.70 1.35±0.30 0.45±0.20 100 —
    3/8 φ9.5 ≥9.5 ≤3.20 1.45±0.30 0.50±0.20 50 1.22
    1/2 φ12.7 ≥12.7 ≤4.20 1.65±0.30 0.50±0.20 — 1.22
    5/8 φ15.0 ≥15.0 ≤5.20 1.80±0.30 0.55±0.30 — 1.22
    3/4 φ19.1 ≥19.1 ≤6.30 1.95±0.30 0.60±0.30 — 1.22
    1 φ25.4 ≥25.4 ≤8.50 2.00±0.40 0.60±0.30 — 1.22
    5/4 φ30.0 ≥30.0 ≤10.20 2.15±0.40 0.65±0.30 — 1.22
    3/2 φ39.0 ≥39.0 ≤13.50 2.45±0.40 0.75±0.30 — 1.22
    2 φ50.0 ≥50.0 ≤17.00 2.75±0.40 0.80±0.30 — 1.22
    5/2 φ64.0 ≥64.0 ≤21.00 3.05±0.40 1.05±0.30 — 1.22
    3 φ75.0 ≥76.0 ≤25.00 3.05±0.50 1.05±0.40 — 1.22
    7/2 φ90.0 ≥90.0 ≤30.00 3.10±0.50 1.05±0.40 — 1.22
    4 φ100.0 ≥100.0 ≤34.00 3.10±0.50 1.10±0.40 — 1.22
    5 φ125.0 ≥125.0 ≤42.00 3.15±0.50 1.10±0.40 — 1.22
    Note: Other Sizes are available as per customization.

    Make a free consultation

    Frequently Asked Questions (FAQ)

    What is double wall heat shrink tubing?
    Double wall heat shrink tubing (also known as dual-wall tubing) consists of a co-extruded polyolefin outer layer and an inner layer of hot melt adhesive. When heated, the outer layer shrinks while the inner adhesive melts and flows, encapsulating the components to provide a waterproof, environmental seal.
    What does a 3:1 shrink ratio mean?
    A 3:1 shrink ratio means the tubing will shrink down to one-third of its original supplied diameter when heated. This high shrink ratio is ideal for covering irregularly shaped connectors, joints, and transitions.
    Is this heat shrink tubing waterproof?
    Yes. Because of the inner hot melt adhesive layer, the tubing melts and flows during the heating process to fill all irregular gaps. Once cooled, it forms a highly reliable waterproof, moisture-proof, and airtight seal.
    What is the operating temperature range?
    The continuous operating temperature range is -45℃ to 125℃ for standard colors (like black), and -45℃ to 105℃ for the clear (transparent) version. It starts shrinking at 70℃ and achieves full contraction at 125℃.
    Does the product comply with environmental standards?
    Yes, the product is fully compliant with EU RoHS environmental standards. It does not release hazardous substances during usage or shrinkage, ensuring safety for both operators and the environment.
    Can I customize the color and size?
    Yes. While black is the standard color, clear and other custom colors can be manufactured upon request. Additionally, customized sizes beyond the standard specification sheet are available to suit your specific application requirements.